[AC2] Aula07

Signed-off-by: TiagoRG <tiago.rgarcia@ua.pt>

2ano/2semestre/ac2/aula06/ex06.c

@@ -55,7 +55,7 @@ int main() {
     int v = 0;
 
     while (1) {
-        if (i == 0){ 
+        if (i == 0) { 
             AD1CON1bits.ASAM = 1;               // Start conversion
             while (IFS1bits.AD1IF == 0);        // Wait while conversion not done
             int total = 0;

2ano/2semestre/ac2/aula07/part1-1.c

@@ -0,0 +1,28 @@
+#include <detpic32.h>
+
+int main() {
+    TRISBbits.TRISB4 = 1;
+    AD1PCFGbits.PCFG4 = 0;
+    AD1CON1bits.SSRC = 7;
+    AD1CON1bits.CLRASAM = 1;
+    AD1CON3bits.SAMC = 1;
+    AD1CON2bits.SMPI = 0;
+    AD1CHSbits.CH0SA = 4;
+    AD1CON1bits.ON = 1;
+
+    IPC6bits.AD1IP = 2;         // configure priority of A/D interrupts
+    IEC1bits.AD1IE = 1;         // enable A/D interrupts
+    IFS1bits.AD1IF = 0;         // clear A/D interrupt flag
+
+    EnableInterrupts();
+    AD1CON1bits.ASAM = 1;
+
+    while (1);
+}
+
+void _int_(27) isr_adc(void) {
+    printInt(ADC1BUF0, 16 | 3 << 16);
+    putChar('\r');
+    IFS1bits.AD1IF = 0;
+    AD1CON1bits.ASAM = 1;
+}

2ano/2semestre/ac2/aula07/part1-2.c

@@ -0,0 +1,86 @@
+#include <detpic32.h>
+
+#define SAMPLES 8
+
+volatile unsigned char voltage = 0;
+
+const unsigned int dis7Scodes[] = {0x3F, 0x06, 0x5B, 0x4F, 0x66, 0x6D,
+                                   0xFD, 0x07, 0x7F, 0x6F, 0x77, 0xFC,
+                                   0x39, 0x5E, 0xF9, 0xF1};
+
+typedef enum { HIGH, LOW } flag;
+
+unsigned char toBdc(unsigned char value) {
+    return ((value / 10) << 4) + (value % 10);
+}
+
+void send2displays(unsigned char value) {
+    static flag f = LOW;
+    value = toBdc(value);
+    unsigned char high = dis7Scodes[value >> 4];
+    unsigned char low = dis7Scodes[value & 0x0F];
+
+    if (f == HIGH) {
+        LATD = (LATD & 0xFF9F) | 0x0040;
+        LATB = (LATB & 0x80FF) | high << 8;
+        f = LOW;
+    } else {
+        LATD = (LATD & 0xFF9F) | 0x0020;
+        LATB = (LATB & 0x80FF) | low << 8;
+        f = HIGH;
+    }
+}
+
+void delay(unsigned int ms) {
+    resetCoreTimer();
+    while (readCoreTimer() < ms * 20000);
+}
+
+int main() {
+    TRISBbits.TRISB4 = 1;                   // RB4 digital output disconnected
+    AD1PCFGbits.PCFG4 = 0;                  // RB4 configured as analog input (AN4)
+    AD1CON1bits.SSRC = 7;                   // Conversion trigger selection bits: in this
+                                            // mode an internal counter ends sampling and
+                                            // starts conversion
+    AD1CON1bits.CLRASAM = 1;                // Stop conversions when the 1st A/D converter
+                                            // interrupt is generated. At the same time, hardware
+                                            // clears the ASAM bit
+    AD1CON3bits.SAMC = 16;                  // Sample time is 16 TAD (TAD = 100 ns)
+    AD1CON2bits.SMPI = SAMPLES - 1;         // Interrupt is generated after 16 samples
+    AD1CHSbits.CH0SA = 4;                   // Selects AN4 as input for the A/D converter
+    AD1CON1bits.ON = 1;                     // Enable A/D converter
+
+    IPC6bits.AD1IP = 2;                     // configure priority of A/D interrupts
+    IEC1bits.AD1IE = 1;                     // enable A/D interrupts
+    IFS1bits.AD1IF = 0;                     // clear A/D interrupt flag
+
+    TRISB &= 0x80FF;                 // Configure RB8-RB14 as outputs
+    TRISD &= 0xFF9F;                 // Configure RD5-RD6 as outputs
+
+    EnableInterrupts();
+    AD1CON1bits.ASAM = 1;
+
+    int i = 0;
+
+    while (1) {
+        if (i == 0) {
+            AD1CON1bits.ASAM = 1;               // Start conversion
+        }
+        send2displays(voltage);
+        delay(10);
+        i = (i + 1) % 20;
+    }
+
+    return 0;
+}
+
+void _int_(27) isr_adc(void) {
+    AD1CON1bits.ASAM = 0;               // Stop conversion
+    int total = 0;
+    int *p = (int *)(&ADC1BUF0);
+    for (; p <= (int *)(&ADC1BUFF); p+=4)
+        total += *p;
+    int val_ad = total / SAMPLES;
+    voltage = (val_ad * 33 + 511) / 1023;
+    IFS1bits.AD1IF = 0;                 // Reset AD1IF
+}

2ano/2semestre/ac2/aula07/part2-1.c

@@ -0,0 +1,32 @@
+#include <detpic32.h>
+
+int main() {
+    TRISBbits.TRISB4 = 1;
+    AD1PCFGbits.PCFG4 = 0;
+    AD1CON1bits.SSRC = 7;
+    AD1CON1bits.CLRASAM = 1;
+    AD1CON3bits.SAMC = 16;
+    AD1CON2bits.SMPI = 0;
+    AD1CHSbits.CH0SA = 4;
+    AD1CON1bits.ON = 1;
+
+    IPC6bits.AD1IP = 2;         // configure priority of A/D interrupts
+    IEC1bits.AD1IE = 1;         // enable A/D interrupts
+    IFS1bits.AD1IF = 0;         // clear A/D interrupt flag
+
+    TRISD &= 0xF7FF;            // Configure RD11 as output
+
+    EnableInterrupts();
+    AD1CON1bits.ASAM = 1;
+
+    while (1);
+}
+
+void _int_(27) isr_adc(void) {
+    volatile int adc_value;
+    LATDbits.LATD11 = 0;
+    adc_value = ADC1BUF0;
+    IFS1bits.AD1IF = 0;
+    AD1CON1bits.ASAM = 1;
+    LATDbits.LATD11 = 1;
+}

2ano/2semestre/ac2/aula07/part2-2.c

@@ -0,0 +1,37 @@
+#include <detpic32.h>
+
+int main() {
+    TRISBbits.TRISB4 = 1;
+    AD1PCFGbits.PCFG4 = 0;
+    AD1CON1bits.SSRC = 7;
+    AD1CON1bits.CLRASAM = 1;
+    AD1CON3bits.SAMC = 16;
+    AD1CON2bits.SMPI = 0;
+    AD1CHSbits.CH0SA = 4;
+    AD1CON1bits.ON = 1;
+
+    IPC6bits.AD1IP = 2;         // configure priority of A/D interrupts
+    IEC1bits.AD1IE = 1;         // enable A/D interrupts
+    IFS1bits.AD1IF = 0;         // clear A/D interrupt flag
+
+    TRISD &= 0xF7FF;            // Configure RD11 as output
+
+    EnableInterrupts();
+    AD1CON1bits.ASAM = 1;
+
+    while (1) LATDbits.LATD11 = 0;
+}
+
+void _int_(27) isr_adc(void) {
+    volatile int adc_value;
+    adc_value = ADC1BUF0;
+    IFS1bits.AD1IF = 0;
+    AD1CON1bits.ASAM = 1;
+    LATDbits.LATD11 = 1;
+}
+
+// Conversão A/D: 3340 ns
+// Conversão + latência + prologo: 4020 ns
+// Epilogo: 632 ns
+// 
+// Overhead total: 4020 - 3340 + 632 = 680 + 632 = 1312 ns