50 lines
12 KiB
Plaintext
50 lines
12 KiB
Plaintext
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1678227229266 ""}
|
|
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 20.1.1 Build 720 11/11/2020 SJ Lite Edition " "Version 20.1.1 Build 720 11/11/2020 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1678227229267 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Mar 7 22:13:49 2023 " "Processing started: Tue Mar 7 22:13:49 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1678227229267 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1678227229267 ""}
|
|
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta Mux2_1Demo -c Mux2_1Demo " "Command: quartus_sta Mux2_1Demo -c Mux2_1Demo" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1678227229267 ""}
|
|
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1678227229288 ""}
|
|
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1678227229346 ""}
|
|
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1678227229346 ""}
|
|
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1678227229394 ""}
|
|
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1678227229394 ""}
|
|
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Mux2_1Demo.sdc " "Synopsys Design Constraints File file not found: 'Mux2_1Demo.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1678227229705 ""}
|
|
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1678227229706 ""}
|
|
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1678227229706 ""}
|
|
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1678227229706 ""}
|
|
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1678227229706 ""}
|
|
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1678227229706 ""}
|
|
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1678227229706 ""}
|
|
{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1678227229709 ""}
|
|
{ "Info" "0" "" "Analyzing Slow 1200mV 85C Model" { } { } 0 0 "Analyzing Slow 1200mV 85C Model" 0 0 "Timing Analyzer" 0 0 1678227229710 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229710 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229712 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229712 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229712 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229713 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229713 ""}
|
|
{ "Info" "0" "" "Analyzing Slow 1200mV 0C Model" { } { } 0 0 "Analyzing Slow 1200mV 0C Model" 0 0 "Timing Analyzer" 0 0 1678227229715 ""}
|
|
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1678227229733 ""}
|
|
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1678227229889 ""}
|
|
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1678227229900 ""}
|
|
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1678227229900 ""}
|
|
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1678227229900 ""}
|
|
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1678227229900 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229900 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229901 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229901 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229902 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229902 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229902 ""}
|
|
{ "Info" "0" "" "Analyzing Fast 1200mV 0C Model" { } { } 0 0 "Analyzing Fast 1200mV 0C Model" 0 0 "Timing Analyzer" 0 0 1678227229903 ""}
|
|
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1678227229942 ""}
|
|
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1678227229942 ""}
|
|
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1678227229942 ""}
|
|
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1678227229942 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229943 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229943 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229943 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229944 ""}
|
|
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1678227229944 ""}
|
|
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1678227230154 ""}
|
|
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1678227230155 ""}
|
|
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "536 " "Peak virtual memory: 536 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1678227230163 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Mar 7 22:13:50 2023 " "Processing ended: Tue Mar 7 22:13:50 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1678227230163 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1678227230163 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1678227230163 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1678227230163 ""}
|