{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1674690116458 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 20.1.1 Build 720 11/11/2020 SJ Lite Edition " "Version 20.1.1 Build 720 11/11/2020 SJ Lite Edition" {  } {  } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1674690116458 ""} { "Info" "IQEXE_START_BANNER_TIME" "Wed Jan 25 23:41:56 2023 " "Processing started: Wed Jan 25 23:41:56 2023" {  } {  } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1674690116458 ""}  } {  } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1674690116458 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta MuxDemo -c MuxDemo " "Command: quartus_sta MuxDemo -c MuxDemo" {  } {  } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1674690116459 ""}
{ "Info" "0" "" "qsta_default_script.tcl version: #1" {  } {  } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1674690116478 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines.  Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." {  } {  } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines.  Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1674690116519 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" {  } {  } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1674690116519 ""}
{ "Info" "ICUT_CUT_DEFAULT_OPERATING_CONDITION" "High junction temperature 85 " "High junction temperature operating condition is not set. Assuming a default value of '85'." {  } {  } 0 21076 "%1!s! operating condition is not set. Assuming a default value of '%2!s!'." 0 0 "Timing Analyzer" 0 -1 1674690116566 ""}
{ "Info" "ICUT_CUT_DEFAULT_OPERATING_CONDITION" "Low junction temperature 0 " "Low junction temperature operating condition is not set. Assuming a default value of '0'." {  } {  } 0 21076 "%1!s! operating condition is not set. Assuming a default value of '%2!s!'." 0 0 "Timing Analyzer" 0 -1 1674690116566 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "MuxDemo.sdc " "Synopsys Design Constraints File file not found: 'MuxDemo.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." {  } {  } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1674690116670 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" {  } {  } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1674690116670 ""}
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive.  No clocks were created or changed." {  } {  } 0 332096 "The command derive_clocks did not find any clocks to derive.  No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1674690116670 ""}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." {  } {  } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1674690116670 ""}
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" {  } {  } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1674690116671 ""}
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." {  } {  } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1674690116671 ""}
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" {  } {  } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1674690116671 ""}
{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" {  } {  } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1674690116673 ""}
{ "Info" "0" "" "Analyzing Slow 1200mV 85C Model" {  } {  } 0 0 "Analyzing Slow 1200mV 85C Model" 0 0 "Timing Analyzer" 0 0 1674690116673 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116674 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116675 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116675 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116676 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116676 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116676 ""}
{ "Info" "0" "" "Analyzing Slow 1200mV 0C Model" {  } {  } 0 0 "Analyzing Slow 1200mV 0C Model" 0 0 "Timing Analyzer" 0 0 1674690116677 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" {  } {  } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1674690116691 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" {  } {  } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1674690116901 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" {  } {  } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1674690116912 ""}
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive.  No clocks were created or changed." {  } {  } 0 332096 "The command derive_clocks did not find any clocks to derive.  No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1674690116913 ""}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." {  } {  } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1674690116913 ""}
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." {  } {  } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1674690116913 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116913 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116914 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116914 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116914 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116915 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116915 ""}
{ "Info" "0" "" "Analyzing Fast 1200mV 0C Model" {  } {  } 0 0 "Analyzing Fast 1200mV 0C Model" 0 0 "Timing Analyzer" 0 0 1674690116917 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" {  } {  } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1674690116956 ""}
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive.  No clocks were created or changed." {  } {  } 0 332096 "The command derive_clocks did not find any clocks to derive.  No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1674690116956 ""}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." {  } {  } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1674690116956 ""}
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." {  } {  } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1674690116956 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116956 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116957 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116957 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116957 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" {  } {  } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1674690116958 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" {  } {  } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1674690117163 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" {  } {  } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1674690117164 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "465 " "Peak virtual memory: 465 megabytes" {  } {  } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1674690117172 ""} { "Info" "IQEXE_END_BANNER_TIME" "Wed Jan 25 23:41:57 2023 " "Processing ended: Wed Jan 25 23:41:57 2023" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1674690117172 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1674690117172 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" {  } {  } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1674690117172 ""}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1674690117172 ""}